The eMUS user terminal is the operator interface of the VoIP centralization system for the remote control of radio devices (HF, VHF, UHF). The operator interacts thanks to the support of a touch-screen monitor.
The terminal enables the operator to perform point-to-point communications with other
network-connected operators, radio communications and data messages exchange.
The SAIS 135-5 system had been designed to add to a class A AIS station, certified in accordance to international regulation (ITU-R M.1371 e IEC 61993-2 Ed 2.0 2012), secure functions, rugged mechanical characteristics and connectors, suitable for safety specifications and performance.
The receiving active multicoupler of the MCR-1162 series can support up to 16 receivers in the HF band (1.5 ÷ 32 MHz).
The coupling between antenna and receivers in the distribution of the RF signal is carried out in such a way as to maintain the level of the input signal on the 16 outputs unchanged (gain 0 db ± 1 dB) and to minimize the noise.
The antenna switching matrix series, mod. RAM‐x152, has been designed and built to allow the RF switching of antennas connected to transceiver devices in the MF/HF band.
The RAM-x152 matrix also allows to manage the switching of antenna adapters and their signals, ensuring complete control over the status of the configuration.
The CSU‐1077 switching unit is a device that allows the switching of control signals between
transceiver devices that are installed in the Primary-Reserve configuration.
On the front panel there are LEDs that indicate the switching status of the signals.
The CSU-1124 is a unit that allows automatic and manual switching with the use of coaxial relays of the antenna line (and therefore of the antenna itself) between transceiver devices in the Primary-Reserve configuration.
The device allows the sharing of a single antenna between two transceiver devices up to a maximum of four independent radiant systems.
CSU-1077 The CSU‐1077 switching unit is a device that allows the switching of control signals between transceiver… Read more CSU-1124 The CSU-1124 is a unit that allows automatic and manual switching with the use of coaxial… Read more MCR-1162 The receiving active multicoupler of the MCR-1162 series can support up to 16 receivers in the…… Continue reading Other Products
The PELAGUS VTMIS integrated web solution is designed to offer a global view of the maritime traffic situation in the area of interest, using all available sensors, to provide value-added services to vessels and increase navigation safety.
The position data collected by the sensors is processed to extract kinematic and other information related to the tracks.
PELAGUS GMDSS is an integrated and scalable software solution, designed to provide continuous monitoring and emergency identification capabilities in GMDSS A1 and A2 Marine Areas. The system allows to manage remote radio sensors in order to collect incoming DSC calls and alert operators to speed up SAR operations.
PELAGUS is a scalable software solution that meets the needs of Coastal Authorities allowing an improved awareness of the maritime traffic. PELAGUS allows the collection, processing, storage, display and distribution of data originating from multiple sources and sensors relating to vessel traces and, more generally, to maritime data.